Stickon Bifocal - Hydrotac Lenses

Stickon Bifocals - Hydrotac Lenses

Clear Skirt - Blue Frame

Tusa Sport - Liberator Mask with Corrective Lenses

DiveOptx - Hydrotac Lenses - Neoptx - Dive Lenses

No longer take the risk of misreading any of your instruments or not being able to focus your camera. Using a pair of our Diveoptx is a quick and economical solution to adding magnification to any dive masks.
Availability: In stock
UW Card Discount

Cardholders pay only A$48.45

Membership Card
was A$59.95 Special Price A$49.95

DiveOptx Lenses (1.6" Diameter)


Limited range left - new brand StickTite available NOW

DiveOptx allows divers a quick & economical solution to adding magnification in dive masks.

These lenses are an alternative to the popular Stickon Bifocals - Hydrotac Lenses the difference is that Dive Optx lenses measure 4cm along the flat edge and are 2cm deep for increased field of vision whilst the Hydrotac Lenses measure 3cm along the flat edge and are 1.6cm deep.


  • Instant Magnification
  • Designed for use with all diving masks
  • Trim with scissors to customize size & shape
  • Removable & Reusable
  • LARGE 1.6 inch diameter for increased field of vision
  • Easy to apply and remove
  • Environmentally friendly materials
  • Material: Polymer aspheric
  • Unisex

What's in the box?

  • One pair of DiveOptx lenses

Installation Instructions

Used for sunglasses, safety glasses and Dive masks 

  • Before installation, make sure your eyewear and your hands are spotlessly clean by washing them with detergent and hot water.
  • Carefully remove lenses from our free plastic lens case and keep for future storage use.
  • Drop lenses in warm/hot water for a minute or longer prior to installation.
  • Apply one lens at a time to your eyewear, positioning close to the nose bridge and low on the inside.
  • Press down gently on the lens for several seconds to remove excess moisture.
  • Put on your eyewear to check for proper positioning. At this time you can move and adjust the lenses to your specific needs.
  • By using a lint free cloth carefully pat away any excess water from the lens. Allow the lenses to sit and dry in place for 1-2 hours. Keep in mind that your vision through the lenses will be a little blurry until they are completely dried.
  • Repeat these steps for 2nd lens.
  • When removing lens, simply place your fingernail under one corner and peel off gently. 
These lenses are reusable.

You don't have to remove lenses after every dive, simply rinse your mask gently with tap water to remove all salt residues.

NOTE: External use only! Keep out of reach of small children, if swallowed can cause choking.

Please chose from the various strengths / magnification in the drop-down above