QYSEA Fifish V6s - Underwater Drone Kit with Robotic Arm

QYSEA Fifish V6s - Underwater Drone Kit with Robotic Arm

LEFEET S1

LEFEET - S1 PRO Waterscooter

Sea & Sea YS-01 SOLIS Strobe head

The Sea & Sea YS-01, the best-selling strobe in its class has been redesigned, to the YS-01 SOLIS boasting improved performance.
Availability: In stock
3%
UW Card Discount

Cardholders pay only A$716.83

Membership Card
was A$839.00 Special Price A$739.00

Free shipping

Sea & Sea YS-01 SOLIS Underwater DS-TTL II Strobe

The YS-01, the best-selling strobe in its class has been redesigned, boasting improved performance.

The DS-TTL ll circuitry helps emit the correct amount of light automatically based upon light intensity from the camera’s onboard flash. The strobe allows you to adjust light intensity stronger or weaker from programmed standard exposure. With this function, even an inexperienced underwater photographer can instinctively control the desired amount of light. Example: If you are using two YS-01 Solis strobes, one on the right and the other on the left, and there is white soft coral to the right of your photographic subject, you can just delicately lessen light intensity from the strobe on the right alone by just turning the light level control to minus. With the improved circuitry, you can realize the desired lighting for all your underwater images in a breeze.

Increased light intensity from the target light

Compared with the predecessor model, the lighting intensity of the YS-01 Solis’ target light is 40% stronger increasing the visibility of the light axis has improved helps you understand the position of the strobe position more accurately.

Specifications

  • Superior light distribution and wide beam angle.
  • Because of the exclusively designed prism lens, the YS-01 Solis realizes a wide beam angle of 100°x 100°with ideal flat light distribution even when the accessory diffuser is not attached. With the diffuser, the light will soften and beam angle will increase to 110°x 110°.
  • [Guide Number (ISO 100/m) (land)] 20.
  • [Beam Angle] 100°x 100° (with diffuser 110°x110°).
  • [Batteries] 4xAA A: 6V Ni-MH: 4.8V.
  • [Number of Flashes] A: 230 Ni-MH: 300.
  • [Recycle time (full)] A: 2.5 sec. Ni-MH: 1.9 sec.
  • [Color temperature] 5600K.
  • [Color temperature w/diffuser] 5250K.
  • [Depth rating] 75m / 250ft.
  • [Dimensions (WxHxD)] 75x111x129mm / 4x4.4x5.1inch.
  • [Weight] : 441g / 14.7oz (w/o batteries) * Attached a fixing bolt to the Strobe.
  • [Underwater weight] : Approx.+60g / 0.35oz(w/ batteries).
  • Exposure control: DS-TTLII +4steps -5steps.
  • Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps).
  • Pre-flash control: Equipped with pre-flash cancel mode.
  • DS-TTLII function.
  • Auto power OFF function.
  • Sync cord: Fiber-Optic Cable.
  • Over-pressure relief valve.
  • LED target light.

In the box

  • 1x Sea & Sea YS-01 SOLIS strobe
  • 1x Fixing bolt
  • 1x Diffuser
  • 1x Silicone Grease 
  • 1x Diffuser Strap

Fibre optic cable / arms / tray not included

See the manual for the YS-03 SOLIS HERE.